Linear MJ5011S 1/2 HP 115V Medium Duty Jackshaft Garage Operator Sectional Doors. The Model MJ5011S is a 1/2 HP, 115-volt, medium duty jackshaft commercial door operator (for vertical and high lift sectional doors) with floor level disconnect. Not to exceed 10 cycles per hour, maximum 75 cycles per day.
Designed for standard lift sectional doors up to 14 ft high. Solid state control circuit, constant pressure required if no entrapment devices are installed (entrapment devices are not included as standard equipment). Recommended maximum duty cycle of 10 cycles per hour, 75 cycles per day. Solid state or electromechanical control circuit. Constant pressure required to close if no entrapment devices are installed.
V-Belt drive from motor to clutch shaft. Floor level disconnect for manual door operation. Manual operation will not affect limit switch settings. 41B30 door sprocket and #41 drive chain supplied.
Standard door speed is approximately 11 inches per second. Wired to accept reversing devices. 1/2 HP rigid base permanent split capacitor motor. 24-Volt control circuit with OPEN, CLOSE and STOP 3-button station.OPEN button (and single button) will automatically override down travel and reverse door to the full open position. External terminals for single button (residential type) radio control. 10 cycles per hour, 75 cycles per day. The item "Linear MJ5011S 1/2 HP 115V Medium Duty Jackshaft Garage Operator Sectional Doors" is in sale since Monday, November 16, 2020. This item is in the category "Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems". The seller is "household-supplies-mega-store" and is located in Miami, Florida. This item can be shipped worldwide.